Vehicle Equipment & Safe Operation — Oklahoma
Oklahoma motorcycle permit practice test: 280 free practice questions (Based on the official driver handbook). The official format is not yet verified; check the official site before your test. Vehicle Equipment & Safe Operation: 113 questions.
Brakes, tires, lights, mirrors, seat belts, child seats and basic vehicle control.
This topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines.
| Topic / Metric | Value |
|---|---|
| Topic | Vehicle Equipment & Safe Operation |
| License test | Oklahoma Motorcycle permit test |
| Topic questions | 113 (40% of 280 total) |
| Review status | This topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines. |
Official handbook
Not yet verified
Advertisement
Questions (113)
1. It is a good idea to wear reflective clothing:
- At night.
- During the day.
- At dusk.
- All of the above. ✓
Answer: D. All of the above.
2. The front brake supplies approximately how much of a motorcycle's potential stopping power?
- About 25 percent
- About 50 percent
- About 70 percent ✓
- About 95 percent
Answer: C. About 70 percent
The front brake supplies about 70 percent of a motorcycle's potential stopping power. The manual explains that most motorcycles have separate front and rear brake controls and that you should use both every time you slow or stop. It then states that the front brake is the more powerful of the two and can give 70% or more of your total stopping power. That matches the answer of about 70 percent. The same manual also lists this exact question among its sample knowledge test items, with the front brake as the subject.
3. Do not change gears on railroad tracks because:
- Your motorcycle may stall. ✓
- You might go too fast.
- Other drivers may not be expecting you to change gears.
- The uneven surface may make it more difficult to switch gears.
Answer: A. Your motorcycle may stall.
4. When braking where traction is reduced, you should:
- Apply the brakes more quickly than usual.
- Apply the brakes more gently than usual. ✓
- Not use the rear brake.
- Not use the front brake.
Answer: B. Apply the brakes more gently than usual.
Apply the brakes more gently than usual when traction is reduced. The manual explains that when a motorcycle is leaned over, less traction is available for braking. In that situation, you should brake smoothly and gradually and not use as much braking force as you would with the bike straight up. As you slow and reduce the lean, more traction becomes available, so you can apply the brakes more firmly. The manual also warns against grabbing the brake lever or using abrupt pressure, which can cause the brakes to lock.
5. The front brake can provide how much of a motorcycle's braking power?
- 10 percent
- 25 percent
- 50 percent
- 75 percent ✓
Answer: D. 75 percent
The front brake can provide about 75 percent of a motorcycle's braking power, which is the largest share by far. The manual explains that most motorcycles have a separate brake control for each wheel and that riders should use both every time they slow or stop. It then points out that the front brake is the stronger of the two and supplies 70 percent or more of total stopping power, and that full straight-line braking means applying both brakes fully without locking either wheel. Among the choices given, the one that matches that 70-percent-or-more figure is 75 percent, with the other numbers far too small.
6. You will ______ hear a tire going flat.
- Always
- Usually
- Frequently
- Seldom ✓
Answer: D. Seldom
The correct choice is Seldom: riders rarely hear a tire going flat. The manual says you will seldom hear a tire go flat. Instead, a flat may show up as a change in how the motorcycle handles. If the rear tire is flat, the back may jerk or sway; if the front is flat, steering can feel heavy. So the absence of a loud sound does not mean the tires are fine. Watch for unusual handling as the warning sign.
7. Which of the following types of clothing can help you to be seen by other drivers?
- Darkly-colored clothes
- Clothes made from synthetic materials
- Reflective clothes ✓
- A leather jacket
Answer: C. Reflective clothes
Reflective clothes are the choice that helps you be seen — the manual calls reflective, bright-colored clothing on your helmet and jacket or vest the best option. The manual ranks visibility gear plainly: bright orange, red, yellow or green jackets and vests beat drab or dark colors, brightly colored helmets help too, and reflective bright-colored clothing is best of all. It points out that reflective material on a vest and on the sides of the helmet lets drivers coming from the side spot you, and that it helps drivers ahead of and behind you as well. Since riders often go unseen in crashes, gear that bounces light back to other drivers is the practical answer.
8. When operating a motorcycle on a slippery surface, you should:
- Ride faster than usual.
- Use only the front brake.
- Reduce your speed. ✓
- Use only the rear brake.
Answer: C. Reduce your speed.
When riding on a slippery surface, reduce your speed. The manual's slippery-surface section lists reducing speed first: slow down before you reach the slippery area so you are less likely to skid. It also notes that your motorcycle needs more distance to stop, and that slowing down before entering wet curves matters even more. Instead of sudden changes, you stay smooth and use both brakes with gentle, gradual pressure. Slowing early gives you room to do all of that without a skid.
9. Where is the engine cut-off switch usually located?
- Near the left handgrip
- Near the right handgrip ✓
- Near the left footrest
- Near the right footrest
Answer: B. Near the right handgrip
10. Which of the following is not a type of protective riding gear?
- A leather jacket
- Boots that go above the ankle
- Hearing protection
- Pants made of a soft material ✓
Answer: D. Pants made of a soft material
Pants made of a soft material are not a type of protective riding gear; protective riding pants should be leather or sturdy synthetic material. The manual says riding jackets and pants should cover your arms and legs, and it names leather as offering the most protection while sturdy synthetic material also protects. Soft pants do not meet that protection standard. The other choices are protective: leather is listed as the strongest jacket material, boots should be high enough to cover and support the ankles, and hearing protection guards against permanent hearing damage from engine and wind noise.
Advertisement
Source
Last checked: 2026-10-17 · Verified from official source
Updated: · Based on the official driver handbook