Sharing the Road — Oklahoma

Oklahoma motorcycle permit practice test: 280 free practice questions (Based on the official driver handbook). The official format is not yet verified; check the official site before your test. Sharing the Road: 7 questions. Updated

Pedestrians, cyclists, school buses, emergency vehicles and heavy trucks.

This topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines.

Topic / MetricValue
TopicSharing the Road
License testOklahoma Motorcycle permit test
Topic questions7 (3% of 280 total)
Review statusThis topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines.

Official handbook

Not yet verified Motorcycle manual link not yet collected

Advertisement

Questions (7)

1. When carrying a passenger on a motorcycle, you must:
  1. Have a seat that is large enough for two riders. ✓
  2. Only have one set of footrests.
  3. Not encourage the passenger to wear protective clothing.
  4. Put a sticker on the brake light to warn other motorists that a passenger is on the motorcycle.

Answer: A. Have a seat that is large enough for two riders.

You must have a seat on the motorcycle that is large enough to hold both you and your passenger without crowding. The manual's passenger section lists what the bike needs before you ride two-up. It says the motorcycle should have a proper seat, one big enough for you and your passenger without crowding, and it adds that you should not sit more forward than you normally do. The same passage also calls for passenger footrests and a strap or solid handholds. The seat size matters because the passenger needs room to sit properly behind you rather than squeezed against you.
2. You should use a larger cushion of space:
  1. When roads are slippery. ✓
  2. When it is sunny outside.
  3. When it is colder than usual.
  4. When you are following other motorcycles.

Answer: A. When roads are slippery.

Use a larger space cushion when roads are slippery. The manual tells riders to count off seconds to check following distance, and it says a two-second gap is the minimum. It then lists situations that call for opening up to three seconds or more, and slippery pavement is one of them. The reason given is that your motorcycle may need more room to stop than usual. So when traction is poor, increase the gap rather than staying at the normal minimum. This directly supports the slippery-road choice.
3. On which of the following surfaces does a motorcycle have the best traction?
  1. Dry pavement ✓
  2. Gravel
  3. Snow
  4. Leaves

Answer: A. Dry pavement

Dry pavement gives you the best traction of the choices listed. The manual explains that a motorcycle handles better on surfaces that allow good traction, and it lists the surfaces that give poor traction. Wet pavement, gravel roads, and places where sand and gravel collect are named as poor-traction surfaces. Gravel is called out directly as a surface with bad grip, and dry pavement is the opposite of the wet pavement the manual warns about. So of the four choices, dry pavement is the one that lets the tires grip best.
4. When riding near stopped or slow-moving cars, a motorcyclist should:
  1. Pull over and wait until traffic begins to move.
  2. Ride on the shoulder to get through the area as quickly as possible.
  3. Weave between the cars to get through the area as quickly as possible.
  4. Not weave between the cars. ✓

Answer: D. Not weave between the cars.

Do not weave between the cars; stay in your lane rather than riding through the gaps between stopped or slow-moving vehicles. The manual warns that riding between two rows of cars that are stopped or creeping in one lane exposes you to surprises you cannot predict: a hand coming out of a window, a door opening, or a car turning suddenly. It says riders should discourage lane sharing rather than do it themselves. Because those dangers come from the cars around you, the handbook points to avoiding weaving between them near stopped or slow traffic. It does not recommend pulling over to wait, using the shoulder, or squeezing through.
5. When approaching railroad tracks that cross your lane at an angle, it is usually:
  1. Safest to ride straight within your lane to cross the tracks. ✓
  2. Dangerous to ride straight within your lane to cross the tracks.
  3. Not safe to cross tracks on a motorcycle.
  4. Safest to cross the tracks by riding on the shoulder of the road.

Answer: A. Safest to ride straight within your lane to cross the tracks.

It is usually safest to ride straight within your lane to cross railroad tracks that cross your lane at an angle. The manual says that when railroad tracks cross your lane at an angle, it is usually safer to ride straight within your lane. It warns that turning to take the tracks at a 90-degree angle can be more dangerous because that direction may put you into another lane of traffic. A related passage adds that a steady, straight crossing is better than zigzagging to stay in the lane. So the straight-line approach is the recommended default for angled tracks.
6. If you are riding in traffic when a small animal enters your lane, you should:
  1. Do whatever you can, including swerving into other lanes, to avoid hitting the animal.
  2. Switch lanes as quickly as possible.
  3. Stay in your lane. ✓
  4. Flash your lights to try to scare the animal.

Answer: C. Stay in your lane.

Official handbook: Official handbook
7. If you are using an unfamiliar motorcycle, what should you do before riding?
  1. Ride like you would on your bike, since all bikes are about the same.
  2. Check the controls and shift pattern. ✓
  3. Take the owner’s word that everything is in working order.
  4. Assume you know where all the controls are located.

Answer: B. Check the controls and shift pattern.

Before riding an unfamiliar motorcycle, check the controls and the shift pattern. The manual tells you to operate all the controls before you start riding, and to know the gearshift pattern by working the throttle, clutch and brakes a few times. It explains that controls react differently on different motorcycles and their exact locations can vary slightly, so a borrowed bike needs the same checks you would give your own. You should also find the turn signals, horn, headlight switch, fuel valve and cut-off switch and operate them without hunting for them.
Advertisement

Source

Last checked: 2026-10-17 · Verified from official source

Updated: · Based on the official driver handbook