Bad Weather & Night Driving — New Hampshire
New Hampshire motorcycle permit practice test: 338 free practice questions (Based on the official driver handbook). The official format is not yet verified; check the official site before your test. Bad Weather & Night Driving: 18 questions.
Rain, snow, ice, fog and night driving: visibility, traction and headlight use.
This topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines.
| Topic / Metric | Value |
|---|---|
| Topic | Bad Weather & Night Driving |
| License test | New Hampshire Motorcycle permit test |
| Topic questions | 18 (5% of 338 total) |
| Review status | This topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines. |
Official handbook
Not yet verified
Advertisement
Questions (18)
1. Studies show that when motorcycles have their headlights turned on during the day:
- They are not as easy to see as other vehicles.
- They are more visible to other drivers than when their headlights are turned off. ✓
- Other drivers are often confused.
- They are less safe than when their headlights are turned off.
Answer: B. They are more visible to other drivers than when their headlights are turned off.
2. Rain suits:
- Should not be used.
- Should not balloon when riding. ✓
- Are not needed since motorcycles shouldn't be operated in the rain.
- Should tear easily.
Answer: B. Should not balloon when riding.
Rain suits should not balloon when riding — good-quality rain suits made for motorcycling resist ballooning up and tearing apart at high speeds. The manual's riding gear section says cold or wet weather calls for clothing that keeps you warm and dry, and it describes good-quality rain suits built for motorcycle riding as ones that resist tearing apart or ballooning up at high speeds. A suit that balloons is not doing that job, so the standard the manual sets is a suit that stays in place while you ride.
3. When riding at night, you should:
- Decrease your following distance.
- Increase your following distance. ✓
- Ride faster than you usually would.
- Avoid using your high beam headlight.
Answer: B. Increase your following distance.
When riding at night, increase your following distance — open up a three-second gap or more. The manual explains that judging distance is harder after dark because your eyes depend on shadows and light contrasts to tell how far away something is and how fast it is closing. Its nighttime advice is to open up a three-second following distance or more, and to leave extra room when passing and being passed. So the correct response to darkness is more space, not less. The same section also pairs this with riding slower than you would in daylight.
4. When riding at night, you should do all of the following, except:
- Reduce your speed.
- Increase your following distance.
- Decrease your following distance. ✓
- Use your high beam light, if possible.
Answer: C. Decrease your following distance.
The one thing you should not do at night is decrease your following distance — you want more room, not less. The manual says following too closely is a common factor in motorcycle crashes, and that a rider normally needs at least a two-second gap behind a vehicle. At night it also tells you to slow down enough to stop within the distance your headlight shows you, and to use your high beam whenever you are not following or meeting a car. All of that points to keeping a bigger cushion after dark, so cutting your following distance goes against the manual's advice rather than being part of it.
5. Compared to riding during the day, a motorcycle operator who is riding at night should do all of the following, except:
- Ride more slowly.
- Allow more space between their motorcycle and other vehicles.
- Use their high beam whenever possible.
- Tailgate other vehicles. ✓
Answer: D. Tailgate other vehicles.
6. Slippery surfaces can make it difficult to control a motorcycle. Which of the following would be considered a slippery surface?
- Wet pavement ✓
- A driveway
- Dry pavement
- A parking lot
Answer: A. Wet pavement
Wet pavement is the slippery surface among these choices. The manual lists wet pavement as a surface that gives poor traction, especially just after rain begins and before oil washes away. It says motorcycles handle better on surfaces with good traction, so a wet road is the kind of slippery surface where control can be harder. The other choices are not named as slippery surfaces in the passage. That direct listing supports choosing wet pavement.
7. During the day, your headlight should:
- Not be used.
- Be used on its high beam setting. ✓
- Be used on its low beam setting.
- Alternate between high beam and low beam settings.
Answer: B. Be used on its high beam setting.
During the day, ride with your headlight on the high beam setting. The manual treats daylight riding as a visibility problem, noting that a motorcycle running with its light on during the day is twice as likely to be noticed. It also tells you to get all the light you can and to keep the high beam on whenever you are not following or meeting a car. Since nothing is in front of you in that situation, the setting that gives the most light and the most attention is the high beam. The manual reserves low beam for night riding and fog.
8. To increase your visibility, you should:
- Turn off your headlight during the day.
- Wear dark clothes.
- Keep your headlight on at all times. ✓
- Ride in the right portion of the lane.
Answer: C. Keep your headlight on at all times.
Keep your headlight on at all times, because a lit headlight helps other drivers notice your motorcycle. The manual says a headlight that stays on is a good way to make your motorcycle easier for other drivers to see. It also explains that bright, reflective clothing and helmets help, and that at intersections you should pick a lane position that gives others a clear view of you. Leaving the headlight on fits that same visibility goal, so the handbook supports keeping it on at all times.
9. When riding on a slippery surface, you should not:
- Reduce your speed.
- Avoid sudden moves.
- Use both brakes.
- Brake quickly. ✓
Answer: D. Brake quickly.
When riding on a slippery surface, you should not brake quickly; use smooth, gentle brake pressure instead. The manual's slippery-surface advice is to slow down before you reach the slick spot, avoid any sudden change in speed or direction, and use both brakes with gentle pressure. It says to squeeze the brake lever gradually rather than grab it, and it warns that too much brake can cause a skid. A quick, hard stop asks for exactly the kind of abrupt brake force the manual tells you to avoid on a slippery surface.
10. When riding at night, you should travel:
- More slowly than you would during the day under similar conditions. ✓
- At the speed you would travel during the day under similar conditions.
- Faster than you would during the day under similar conditions.
- On the shoulder of the road so other vehicles can see you.
Answer: A. More slowly than you would during the day under similar conditions.
At night you should ride slower than you would during the day under similar conditions. The manual explains that at night it is harder for you to see and be seen, and picking your headlight or taillight out of surrounding car lights is not easy for other drivers. To make up for that, it tells riders to reduce speed and ride slower than they would during the day, especially on roads they don't know well, which increases the chance of avoiding a hazard. It also says to open up a three-second following distance or more because distances are harder to judge at night.
Advertisement
Source
Last checked: 2026-10-17 · Verified from official source
Updated: · Based on the official driver handbook