Licensing, Demerits & Penalties — Vermont
Vermont CDL practice test: 438 free practice questions (Based on the official driver handbook). The official format is not yet verified; check the official site before your test. Licensing, Demerits & Penalties: 8 questions.
Graduated licensing conditions, demerit points, suspensions, insurance and fines.
This topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines.
| Topic / Metric | Value |
|---|---|
| Topic | Licensing, Demerits & Penalties |
| License test | Vermont CDL permit (CLP) knowledge tests |
| Topic questions | 8 (2% of 438 total) |
| Review status | This topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines. |
Official handbook
Not yet verified
Advertisement
Questions (8)
1. When asked to make a lane change during the driving test, you should:
- Make the change as soon as the examiner asks, without looking.
- Use your turn signal and change lanes when safe. ✓
- Make the lane change as quickly as possible, even if that means cutting off another driver.
Answer: B. Use your turn signal and change lanes when safe.
You should use your turn signal and change lanes when it is safe, after making the necessary traffic checks. The handbook's on-road driving section says that during lane-change portions of the test you will be asked to move left and then back right. It tells you to make the necessary traffic checks first, then use proper signals and change lanes smoothly when it is safe. The driving-safely section adds that lane changes are a special situation and that you check mirrors before changing lanes to make sure there is room. That supports signaling and waiting for a safe gap rather than moving immediately or rushing.
2. During the driving test, the examiner will be scoring you on:
- How well-spoken you are.
- How quickly you arrive to your destination.
- General driving behavior. ✓
Answer: C. General driving behavior.
The examiner will be scoring your general driving behavior, along with specific driving maneuvers. The handbook says that during the road test the examiner scores both particular maneuvers and your general driving behavior. It also explains that you follow the examiner's directions, get enough time to respond, and are never asked to drive unsafely. That points to a broad judgment of how you drive overall, which is what the correct choice describes. Speaking ability and arrival speed are not what the scoring is about.
3. Broken suspension parts:
- Should be repaired immediately. ✓
- Should be repaired, but not immediately.
- Cannot be identified.
Answer: A. Should be repaired immediately.
Broken suspension parts should be repaired immediately. The handbook says the suspension holds up the vehicle and its load and keeps the axles in place, so broken suspension parts can be extremely dangerous. It also lists broken leaf springs, coil springs, U-bolts, spring hangers, and other axle positioning parts as things you must inspect for and find not broken, cracked, missing, or damaged. Because a broken part makes the vehicle unsafe, it needs to be repaired before the vehicle is used, not put off until later.
4. In an empty combination vehicle, the stiff suspension springs and strong brakes will have:
- High traction.
- Low traction. ✓
- No traction.
Answer: B. Low traction.
In an empty combination vehicle, the stiff suspension springs and strong brakes give low traction. The handbook says that when a combination vehicle is lightly loaded, its very stiff suspension springs and strong brakes produce poor traction. An empty vehicle is lightly loaded, so the same condition applies. The handbook adds that this poor traction makes it easy to lock up the wheels, and it warns that the trailer can swing out or the tractor can jackknife quickly. That is why you control speed and brake early whether loaded or empty.
5. When taking a driving test:
- You must supply the same type of vehicle for which you will require a CDL. ✓
- You may supply any type of vehicle, even if it is not the type of vehicle for which you will be using with the CDL.
- The testing station will supply the vehicle.
Answer: A. You must supply the same type of vehicle for which you will require a CDL.
You must supply the same type of vehicle for which you will require a CDL. The handbook says the CDL skills test includes a vehicle inspection, basic control, and on-road driving, and that you must take these tests in the type of vehicle for which you wish to be licensed. It also says you will inspect your vehicle. So the vehicle you bring to the test has to match the CDL class you are applying for.
6. If your license to operate a personal vehicle is revoked or suspended:
- You can get a hardship license to operate a CMV.
- You cannot get a hardship license to operate a CMV. ✓
- Your CDL will not be affected.
Answer: B. You cannot get a hardship license to operate a CMV.
7. During a basic vehicle controls skills test exercise, your vehicle's final position should be:
- In the general area that was described by the examiner.
- In the exact final position described by the examiner. ✓
- Within three feet of the final position described by the examiner.
Answer: B. In the exact final position described by the examiner.
Your vehicle's final position should be exactly the final position described by the examiner. Your vehicle's final position should be exactly the final position described by the examiner. The handbook says you must finish each exercise exactly as instructed, and final position is scored on the straight-line backing and reverse offset backing exercises. It also warns that failing to maneuver the vehicle into the final position described by the examiner leads to a penalty and failure of the Basic Control Skills test. The handbook tells you to ask for clarification if you do not understand the instructions, so there is no need to guess at the target.
8. During the basic control skills test, you will receive points if you:
- Pull up once.
- Check your positioning.
- Cross over exercise boundaries. ✓
Answer: C. Cross over exercise boundaries.
You will receive points if you cross over exercise boundaries. The handbook says you are scored for touching or crossing an exercise boundary line or cone, and each encroachment counts as an error. It also says you can receive points for changing direction to improve your position and for your final position. Pulling up and checking your position are handled differently: initial pull-ups are not penalized, and checking position is treated as a look with limited free looks. Crossing a boundary is the choice that directly matches a scoring item.
Advertisement
Source
Last checked: 2026-10-17 · Verified from official source
Updated: · Based on the official driver handbook