Florida CDL practice test: 411 free practice questions (Based on the official driver handbook). The official format is not yet verified; check the official site before your test. Licensing, Demerits & Penalties: 10 questions. Updated
Graduated licensing conditions, demerit points, suspensions, insurance and fines.
This topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines.
This topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines.
Official handbook
Not yet verifiedState CDL manual (based on the AAMVA model manual) link not yet collected
Advertisement
Questions (10)
1. During the on-road driving test, you must do all of the following, except:
Wear your safety belt.
Obey all traffic laws.
Complete the test without a moving violation.
Obey all traffic signs and signals, but only if other traffic is present. ✓
Answer: D. Obey all traffic signs and signals, but only if other traffic is present.
The one thing you do not have to do is obey traffic signs and signals only when other traffic is present. The on-road section says that at all times during the test you must drive safely and responsibly, and it lists what that includes: obeying all traffic signs, signals, and laws, and finishing the test without an accident or moving violation. The handbook puts no condition on that duty, so watching for signs and signals only when someone else is around is not one of the requirements. The other three choices describe things the test does expect of you.
2. During the driving test, the examiner will be scoring you on:
How well-spoken you are.
How quickly you arrive to your destination.
General driving behavior. ✓
Answer: C. General driving behavior.
The examiner will be scoring your general driving behavior, along with specific driving maneuvers. The handbook says that during the road test the examiner scores both particular maneuvers and your general driving behavior. It also explains that you follow the examiner's directions, get enough time to respond, and are never asked to drive unsafely. That points to a broad judgment of how you drive overall, which is what the correct choice describes. Speaking ability and arrival speed are not what the scoring is about.
3. When asked to make a turn while taking your driving test, you should:
Use your turn signal, but only if other cars are present.
Check traffic only in the direction of the turn.
Check traffic in all directions. ✓
Answer: C. Check traffic in all directions.
Check traffic in all directions. The handbook's on-road driving section describes what to do when the examiner asks you to turn: after braking smoothly and stopping if needed, you check traffic in all directions, signal, and move into the lane needed for the turn. It also says to check traffic thoroughly in all directions as you approach an intersection. That supports checking everywhere, not just toward the turn, and using the signal as part of the turn, not only when cars appear.
Keeps the load the proper distance behind the driver’s compartment.
Maintains a safe distance between the vehicle and other vehicles.
Lightens the load for the tires.
Answer: A. Holds up the vehicle and its load.
The suspension system holds up the vehicle and its load, and it keeps the axles in place. The handbook's inspection section on suspension defects states plainly that the suspension system holds up the vehicle and its load and keeps the axles in place. That is why broken suspension parts are described as extremely dangerous, and why you check for things like spring hangers that let the axle move out of position. The other choices describe cargo spacing, following distance, and tire load, none of which the handbook attributes to the suspension.
6. When asked to make a lane change during the driving test, you should:
Make the change as soon as the examiner asks, without looking.
Use your turn signal and change lanes when safe. ✓
Make the lane change as quickly as possible, even if that means cutting off another driver.
Answer: B. Use your turn signal and change lanes when safe.
You should use your turn signal and change lanes when it is safe, after making the necessary traffic checks. The handbook's on-road driving section says that during lane-change portions of the test you will be asked to move left and then back right. It tells you to make the necessary traffic checks first, then use proper signals and change lanes smoothly when it is safe. The driving-safely section adds that lane changes are a special situation and that you check mirrors before changing lanes to make sure there is room. That supports signaling and waiting for a safe gap rather than moving immediately or rushing.
7. When taking the on-road test, you will be evaluated on regular traffic checks. You should not:
Scan the road for pedestrians.
Check traffic regularly.
Avoid checking your mirrors near intersections. ✓
Check your mirrors regularly.
Answer: C. Avoid checking your mirrors near intersections.
You should not avoid checking your mirrors near intersections; the handbook requires mirror and traffic checks before, while in, and after an intersection. The on-road regular traffic checks section lists checking traffic regularly, checking mirrors regularly, and checking mirrors and traffic before, while in, and after an intersection. It also says to scan high-volume areas and places where pedestrians are likely. Avoiding mirror checks around intersections contradicts that sequence: intersections are precisely where the handbook wants you to keep checking both mirrors and traffic.
Develop your own route to show off your driving skills.
Listen to directions from the examiner. ✓
Bring a passenger to ride with you.
Drive in an unsafe manner.
Answer: B. Listen to directions from the examiner.
You should listen to and follow the examiner's directions during the on-road driving test. The Texas CDL handbook says the examiner scores your specific maneuvers and general driving behavior, and you are to follow the examiner's directions. It also says directions are given with enough time to respond and that you will not be asked to do anything unsafe. Another section warns that failing to follow examiner instructions can cause automatic failure, so paying attention to those directions is the expected and safe action.
Exactly where the examiner has instructed it to be. ✓
Within five feet of the final position described by the examiner.
Wherever you can safely park.
Within two feet of the final position described by the examiner.
Answer: A. Exactly where the examiner has instructed it to be.
Your vehicle's final position should be exactly where the examiner instructed it to be. Passage P1 says you must finish each backing exercise exactly as the examiner instructed, and it ties that to the vehicle's final position as described by the examiner. If you do not put the vehicle into that described final position, you are penalized and fail the Basic Control Skills test. The handbook does not give a foot allowance; the standard is the examiner's stated final position, plus staying within the exercise boundaries.
10. When approaching a curve during the on-road driving test, you must do all of the following, except:
Check traffic thoroughly in all directions.
Reduce your speed before entering the curve.
Keep your vehicle in its lane.
Steadily use the brakes throughout the curve. ✓
Answer: D. Steadily use the brakes throughout the curve.
You should not steadily use the brakes throughout the curve; that is the exception. The handbook says to slow to a safe speed before you enter a curve, and to reduce speed before the curve so you do not need further braking or shifting while in it. It also warns that braking in a curve is dangerous because the wheels can lock and the vehicle can skid. So steady braking all the way through the curve is the action you should not do. Checking traffic in all directions is listed as part of the maneuver.