Sharing the Road — Connecticut

The safest approach is to proceed straight within your lane when crossing angled railroad tracks. The manual says to ride straight within your lane when crossing tracks, keeping a steady speed. It warns that turning to meet tracks at a 90-degree angle can be more dangerous because that direction may carry you into another lane of traffic. It also notes that crossing at an angle forces a rider to zigzag to stay in the lane, and that zigzagging is more hazardous. So the straight-in-lane approach keeps your path predictable and avoids both lane drift and weaving.

You must have a seat on the motorcycle that is large enough to hold both you and your passenger without crowding. The manual's passenger section lists what the bike needs before you ride two-up. It says the motorcycle should have a proper seat, one big enough for you and your passenger without crowding, and it adds that you should not sit more forward than you normally do. The same passage also calls for passenger footrests and a strap or solid handholds. The seat size matters because the passenger needs room to sit properly behind you rather than squeezed against you.

Dry pavement gives you the best traction of the choices listed. The manual explains that a motorcycle handles better on surfaces that allow good traction, and it lists the surfaces that give poor traction. Wet pavement, gravel roads, and places where sand and gravel collect are named as poor-traction surfaces. Gravel is called out directly as a surface with bad grip, and dry pavement is the opposite of the wet pavement the manual warns about. So of the four choices, dry pavement is the one that lets the tires grip best.