Highway & Freeway Driving — Ohio
Ohio permit practice test: 291 free practice questions (Based on the official driver handbook). Official test format: 40 Q, 75%. Highway & Freeway Driving: 12 questions.
Entering and exiting freeways, lane changes, overtaking and HOV lane rules.
This topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines.
| Topic / Metric | Value |
|---|---|
| Topic | Highway & Freeway Driving |
| License test | Ohio Car learner's permit test |
| Topic questions | 12 (4% of 291 total) |
| Review status | This topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines. |
Official handbook
Digest of Ohio Motor Vehicle Laws (bmv.ohio.gov) ✓ Verified from official source
Advertisement
Questions (12)
1. Before passing another vehicle, you should signal:
- Just before changing lanes.
- At any time.
- After changing lanes.
- Early enough for others to know your plans. ✓
Answer: D. Early enough for others to know your plans.
You should signal early enough for other drivers to know what you plan to do. The Ohio digest says an appropriate signal gives other roadway users time to react to your vehicle's movements. It also says to use a turn signal when changing lanes or merging into traffic. Passing another vehicle involves moving into another lane, so the signal needs to go on soon enough that others can see it and prepare. Signaling only as you move, or afterward, does not give them that time.
2. If you are driving on the interstate and pass your exit, you should:
- Quickly cut across traffic to make your turn.
- Make a U-turn to go back to the exit.
- Continue driving and use the next exit. ✓
- Put your vehicle in reverse to go back to the exit.
Answer: C. Continue driving and use the next exit.
If you miss your exit on the interstate, keep going and take the next exit. The Ohio handbook's section on exiting a roadway says plainly that if you miss your exit, you take the next one. It also tells you not to use the median opening, since that is reserved for emergency and public safety vehicles. So the safe move is to stay on the main roadway at your current speed and work toward the following exit rather than trying to fix the mistake on the spot.
3. When the driver behind you wants to pass, you should:
- Speed up.
- Go the same speed.
- Slow down to allow room in front of your vehicle for the other driver to complete the pass easily. ✓
- Change lanes.
Answer: C. Slow down to allow room in front of your vehicle for the other driver to complete the pass easily.
4. You may pass another vehicle:
- In a curve or on a hill because the chance is small that another vehicle is coming.
- By using the shoulder of the highway.
- If your lane is next to a solid yellow line and the passing lane is clear ahead.
- None of the above. ✓
Answer: D. None of the above.
None of these choices is allowed; you may pass only when it is safe and the markings and your view permit it. The Ohio handbook lists times you must not pass: when an oncoming vehicle is coming, when a curve or hill blocks your view, at intersections, and before a railroad crossing or bridge. It also says to keep off the shoulder when passing. For pavement markings, passing is prohibited when the solid yellow line is in your lane; you can pass only when the broken yellow line is on your side. So a clear passing lane alone does not make a pass legal if your lane has a solid yellow line.
5. When passing on a multilane highway:
- Be sure the passing lane is clear. ✓
- Pass only on the right.
- Watch for oncoming traffic.
- There is no need to signal.
Answer: A. Be sure the passing lane is clear.
When passing on a multilane highway, be sure the passing lane is clear before you move into it. The Ohio digest walks through passing step by step: check your mirrors and look over your shoulder for following or passing vehicles, signal, then steer smoothly into the passing lane. It also says that on multi-lane roads the left-most lane is meant for passing slower vehicles when the pass can be finished without interfering with traffic in either direction. Putting those together, the lane you plan to move into has to be open and clear before you commit to the pass.
6. When you need to change lanes, it is important to:
- Signal your intentions ahead of the lane change.
- Check your blind spot.
- Make sure the lane is clear before entering.
- All of the above. ✓
Answer: D. All of the above.
All of the above: signal your intentions ahead of the lane change, check your blind spot, and make sure the lane is clear before entering. The Ohio handbook describes changing lanes as a sequence: make sure the change can be made safely, check your mirrors and blind spots by turning your head and looking over your shoulder, find a gap in traffic, signal, and look again before moving. It also says checking blind spots and traffic behind you matters when changing lanes. Since signaling, checking the blind spot, and confirming the lane is clear are all part of that process, the combined choice is correct.
7. You are driving in the right lane of a multilane highway and want to move into the left lane. You should:
- Look in your rearview mirror for traffic behind you before changing lanes.
- Look over your left shoulder for traffic in your blind spot before changing lanes.
- Look in your side mirror for traffic and turn on your directional signal.
- All of the above. ✓
Answer: D. All of the above.
The correct choice is all of the above: check your rearview mirror, look over your left shoulder for the blind spot, and use your side mirror with your directional signal before moving into the left lane. The Ohio digest describes a lane change as a sequence, not a single glance. It says to check your mirrors and blind spots, including by turning your head and looking over your shoulder toward the lane you plan to enter. It also says to identify a gap, signal, and look again before adjusting speed and steering into the lane. The rearview mirror covers traffic behind you, and checking over your left shoulder covers the area mirrors cannot show. Together these checks match every listed action.
8. Passing is prohibited:
- On hills and curves.
- At intersections.
- At railroad crossings.
- All of the above. ✓
Answer: D. All of the above.
All of the above: passing is prohibited when a curve or hill blocks your view, at intersections, and before a railroad crossing. The Ohio handbook's passing section lists situations where you should not try to pass. It says not to pass when an oncoming vehicle is approaching, when a curve or hill blocks your view, at intersections, or before a highway-railroad crossing or bridge. The choices about hills and curves, intersections, and railroad crossings each match one of those listed situations, so together they point to the all-of-the-above answer.
9. If you are approaching a school bus that has stopped to drop off children on a four-lane highway, you must come to a complete stop only if:
- You are traveling in the same direction as the bus. ✓
- You can see children trying to cross the street.
- You are driving on the opposite side of the highway.
- The bus driver waves you ahead.
Answer: A. You are traveling in the same direction as the bus.
On a four-lane highway, you must come to a complete stop for a stopped school bus only when you are traveling in the same direction as the bus. The Ohio digest draws a line between road types. On a street or road with fewer than four lanes, traffic coming from both directions has to stop at least 10 feet from the front or rear of the bus. On a street or road with four or more lanes, the rule narrows: only traffic going the same way as the bus must stop, and it stops at the rear of the bus and waits there until the bus moves again. So on a four-lane highway, the same-direction traffic is the traffic that must stop.
10. If you are driving in another driver's blind spot, you should:
- Move forward or drop back so the other driver can see you. ✓
- Keep a steady pace.
- Stay in the driver's blind spot.
- Honk to let them know you are there.
Answer: A. Move forward or drop back so the other driver can see you.
Move forward or drop back so the other driver can see you. The Ohio digest explains that large trucks and buses have blind spots on the sides, rear, and front, and that if you cannot see the driver’s face in the side-view mirror, the driver cannot see you. It also says to avoid driving alongside a large vehicle longer than required, because a lane change or swerve raises crash risk. That supports changing your position, moving ahead or dropping back, until you are visible rather than lingering where the other driver has no view of you.
Advertisement
Source
Last checked: 2026-10-17 · Verified from official source
Updated: · Based on the official driver handbook