Highway & Freeway Driving — New Jersey
New Jersey motorcycle permit practice test: 566 free practice questions (Based on the official driver handbook). The official format is not yet verified; check the official site before your test. Highway & Freeway Driving: 32 questions.
Entering and exiting freeways, lane changes, overtaking and HOV lane rules.
This topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines.
| Topic / Metric | Value |
|---|---|
| Topic | Highway & Freeway Driving |
| License test | New Jersey Motorcycle permit test |
| Topic questions | 32 (6% of 566 total) |
| Review status | This topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines. |
Official handbook
Not yet verified
Advertisement
Questions (32)
1. When being passed, you should not move to the portion of the lane farthest from the passing driver because it:
- Discourages the passing driver from cutting into your lane too early.
- Encourages the passing driver to cut into your lane too early. ✓
- Encourages the passing driver to complete the pass as quickly as possible.
- Encourages other drivers to pass you.
Answer: B. Encourages the passing driver to cut into your lane too early.
You should not move to the lane portion farthest from the passing driver because that encourages the passing driver to cut into your lane too early. The manual says that when you are being passed from behind, you should stay in the center portion of your lane, not hug the edge. It also warns that moving to the right side can encourage another rider to cut back in before there is enough space cushion. Applied here, drifting to the far side opens room that can prompt the passing driver to pull in early. Staying centered keeps your space and reduces the chance of a sideswipe.
2. When changing lanes, riders should:
- Rely only on their mirrors to identify other vehicles.
- Turn their head to look for traffic behind them. ✓
- Not worry about other traffic.
- Slam on the brakes to allow any vehicles in their blind spot to pass.
Answer: B. Turn their head to look for traffic behind them.
When changing lanes, turn your head to look for traffic behind and beside you. The manual says checking your mirrors is not enough because motorcycles have blind spots just like cars. Before you change lanes, you should turn your head and look to the side for other vehicles. On a road with several lanes, you also check the lane next to you and the far lane, since a driver in that distant lane may be heading for the same space you want. A head check lets you know what is around you before you move over.
3. Before changing lanes, you should:
- Turn your head to check for vehicles in your blind spot. ✓
- Rely on your mirrors to show you all of your surroundings.
- Point in the direction of the lane change.
- Speed up to get ahead of other vehicles.
Answer: A. Turn your head to check for vehicles in your blind spot.
Before changing lanes, turn your head and look to the side to check your blind spot for other vehicles. The manual says mirrors alone are not enough, because motorcycles have blind spots just like cars. Before a lane change you should turn your head and look to the side for other vehicles. On a road with several lanes, it adds that you should check the lane next to you and the far lane too, since a driver further over may be aiming for the same space you want. Turning your head is how you find the traffic your mirrors miss.
4. When a group of riders is passing another vehicle on a two-lane road, the riders should:
- Pass in pairs.
- Pass in a staggered formation with several riders passing at the same time.
- Pass one at a time. ✓
- Avoid passing.
Answer: C. Pass one at a time.
Riders should pass one at a time. The manual says that on a two-lane highway, riders in a staggered formation should pass one at a time. It describes the lead rider pulling out to pass when safe, then returning to the left position and keeping passing speed to open room for the next rider. The next rider moves up to the left position and waits for a safe chance. It also warns that just because the lead rider passed, conditions may have changed and it may not still be safe for others.
5. Motorists entering a highway from an entrance ramp to your right may not see your motorcycle. To help the entering drivers, you should:
- Sound your horn.
- Flash your lights.
- Move to the left portion of your lane so they can share the lane, if necessary.
- Move into another lane, if necessary. ✓
Answer: D. Move into another lane, if necessary.
Move into another lane if one is open, so the driver entering from the ramp has room. The manual addresses merging traffic directly: drivers coming down an entrance ramp often don't notice a motorcycle already on the highway, so you should give them plenty of room. Its first suggestion is to change to another lane when one is available. If a lane change isn't possible, the manual says to adjust your speed to create space for the merging vehicle. The point is to keep a cushion between you and a driver who hasn't seen you, rather than staying in a spot where you get squeezed.
6. When riding in a group while passing another vehicle, it is best to:
- Allow one rider to fully pass the other vehicle before another rider begins to pass. ✓
- Allow several members of the group to pass the other vehicle at once.
- Have the last rider in the group wave to the driver being passed to signal that no other motorcycles are approaching.
- Pass in a staggered formation.
Answer: A. Allow one rider to fully pass the other vehicle before another rider begins to pass.
Allow one rider to finish passing the other vehicle and get back into position before the next rider starts to pass. The manual says that on a two-lane highway, a staggered group should pass one rider at a time. The lead rider pulls out when safe, then returns to the left position and keeps passing speed to make room for the next rider. It also warns that the lead rider's pass does not prove conditions are still safe for everyone else. Waiting until there is enough room ahead lets each rider return to the same position held before the pass, which is simpler and safer.
7. When changing lanes, you should:
- Signal, use your mirrors, and turn your head. ✓
- Signal and use your mirrors.
- Turn your head and change lanes.
- Signal and change lanes.
Answer: A. Signal, use your mirrors, and turn your head.
You should signal, use your mirrors, and turn your head. The manual treats a lane change as more than a mirror check. It says checking mirrors is not enough because motorcycles have blind spots, and before changing lanes you need to turn your head to look beside you for traffic. On a road with several lanes, check the lane next to you and the far lane too. The passing section also says to signal, use your mirrors, and turn your head to check the blind spot before moving over. Doing all three warns others and gives you a direct look at the space you want.
8. When exiting a highway while riding in a group, which riding formation should be used?
- Staggered
- Single-file ✓
- Paired up
- Riding three across a lane
Answer: B. Single-file
Use a single-file formation when exiting a highway in a group. The manual says a staggered formation is essential on freeways and interstates, but when exiting you should use single file. It gives the reason: a single file gives a better space cushion and more time to react to conditions at the end of the off-ramp. Another section also says it is best to move to single file when entering or leaving freeways or highways. That directly supports single-file for an exit.
9. When passing another vehicle:
- You must complete the pass without exceeding the speed limit. ✓
- You may complete the pass in a no passing zone if the pass was started before the no passing zone began.
- You may exceed the speed limit.
- You should pass on the shoulder.
Answer: A. You must complete the pass without exceeding the speed limit.
When passing, you must finish the pass without going over the posted speed limit. The manual's passing section says passes must be completed within posted speed limits and only where permitted. It also tells you to signal, check for oncoming traffic and your blind spot, move into the left lane, accelerate, and avoid lingering in the other driver's blind spot before returning to your lane. Speeding up to get the pass done faster is not allowed — the pass has to fit inside the limit. The manual also reminds you to know your signs and road markings, which govern where passing is legal.
10. When passing another vehicle:
- You may ride on the shoulder.
- You may complete the pass in a no passing zone.
- You must start and complete the pass within a passing zone. ✓
- You should sound your horn to get the other driver to slow down.
Answer: C. You must start and complete the pass within a passing zone.
You must begin and finish the pass inside a passing zone. The manual's passing steps walk you through moving into the left lane, accelerating past the vehicle, and then signaling and head-checking your way back to your lane. Its closing point is that passes have to be finished within the posted speed limits and only in places where passing is allowed, and it tells you to know your signs and roadway markings. A pass is legal only where the signs and markings permit it, so both the start and the finish of the pass belong in a passing zone.
Advertisement
Source
Last checked: 2026-10-17 · Verified from official source
Updated: · Based on the official driver handbook