Highway & Freeway Driving — Mississippi
Mississippi motorcycle permit practice test: 340 free practice questions (Based on the official driver handbook). The official format is not yet verified; check the official site before your test. Highway & Freeway Driving: 18 questions.
Entering and exiting freeways, lane changes, overtaking and HOV lane rules.
This topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines.
| Topic / Metric | Value |
|---|---|
| Topic | Highway & Freeway Driving |
| License test | Mississippi Motorcycle permit test |
| Topic questions | 18 (5% of 340 total) |
| Review status | This topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines. |
Official handbook
Not yet verified
Advertisement
Questions (18)
1. Just like cars, motorcycles have blind spots. When switching lanes, you should:
- Turn your head and check your blind spot. ✓
- Look only at your mirrors.
- Rely on your peripheral vision.
- Slow down so any vehicle in your blind spot can pass you.
Answer: A. Turn your head and check your blind spot.
Turn your head and check your blind spot before switching lanes. Before changing lanes, turn your head and look to the side for vehicles; mirrors alone do not show everything. The manual says motorcycles have blind spots like cars, so a head check is needed before you move into another lane. On roads with several lanes, also check the far lane and the one next to you, since a driver farther away may be moving toward the same space. Frequent head checks are part of normal scanning, keeping you aware of traffic around you.
2. Before changing lanes, you should:
- Turn your head to check for vehicles in your blind spot. ✓
- Rely on your mirrors to show you all of your surroundings.
- Point in the direction of the lane change.
- Speed up to get ahead of other vehicles.
Answer: A. Turn your head to check for vehicles in your blind spot.
Before changing lanes, turn your head and look to the side to check your blind spot for other vehicles. The manual says mirrors alone are not enough, because motorcycles have blind spots just like cars. Before a lane change you should turn your head and look to the side for other vehicles. On a road with several lanes, it adds that you should check the lane next to you and the far lane too, since a driver further over may be aiming for the same space you want. Turning your head is how you find the traffic your mirrors miss.
3. When changing lanes, you should:
- Signal, use your mirrors, and turn your head. ✓
- Signal and use your mirrors.
- Turn your head and change lanes.
- Signal and change lanes.
Answer: A. Signal, use your mirrors, and turn your head.
You should signal, use your mirrors, and turn your head. The manual treats a lane change as more than a mirror check. It says checking mirrors is not enough because motorcycles have blind spots, and before changing lanes you need to turn your head to look beside you for traffic. On a road with several lanes, check the lane next to you and the far lane too. The passing section also says to signal, use your mirrors, and turn your head to check the blind spot before moving over. Doing all three warns others and gives you a direct look at the space you want.
4. Motorists entering a highway from an entrance ramp to your right may not see your motorcycle. To help the entering drivers, you should:
- Sound your horn.
- Flash your lights.
- Move to the left portion of your lane so they can share the lane, if necessary.
- Move into another lane, if necessary. ✓
Answer: D. Move into another lane, if necessary.
Move into another lane if one is open, so the driver entering from the ramp has room. The manual addresses merging traffic directly: drivers coming down an entrance ramp often don't notice a motorcycle already on the highway, so you should give them plenty of room. Its first suggestion is to change to another lane when one is available. If a lane change isn't possible, the manual says to adjust your speed to create space for the merging vehicle. The point is to keep a cushion between you and a driver who hasn't seen you, rather than staying in a spot where you get squeezed.
5. You should choose the lane position that can:
- Minimize your space cushion and allow you to be seen by others.
- Maximize your space cushion and allow you to be seen by others. ✓
- Maximize your potential for encountering road hazards and allow others to pass you.
- Minimize your potential for encountering road hazards and allow you to closely follow another vehicle.
Answer: B. Maximize your space cushion and allow you to be seen by others.
Choose the lane position that maximizes your space cushion and lets other drivers see you. The manual says to place yourself in the part of the lane where you are most likely to be seen and where you can keep a space cushion around the motorcycle. It also notes that, when traffic allows, the center portion of the lane is usually the best place to be seen by drivers ahead and to keep others from moving into your space. That matches the choice that maximizes your cushion and visibility, rather than shrinking your room or raising your chance of meeting hazards.
6. When preparing to pass another vehicle on the left, which portion of the lane should you ride in?
- The left portion ✓
- The center portion
- The right portion
- The shoulder
Answer: A. The left portion
Before you pass on the left, ride in the left portion of your lane. The manual's passing steps start with lane position: stay in the left portion of the lane at a safe following distance. That spot widens what you can see ahead and puts you where other drivers are more likely to notice you. From there you signal, watch for oncoming traffic, and use your mirrors plus a head turn to clear your blind spot, and only then move into the left lane. So the left portion is the setup position for the pass, not the center or right part of the lane.
7. When changing lanes:
- There is no need to do a head check if you use your mirrors.
- Mirrors provide a full view of the road around your motorcycle.
- You should turn your head and look over your shoulder. ✓
- You can assume drivers will properly respond to your turn signal.
Answer: C. You should turn your head and look over your shoulder.
When changing lanes, you should turn your head and look over your shoulder. The manual is blunt about this: checking your mirrors is not enough. Motorcycles have blind spots just like cars, so before you change lanes you turn your head and look to the side for other vehicles. On a road with several lanes, you also check the far lane and the one next to you, because a driver over there may be aiming for the same gap you want. The manual adds that frequent head checks should become part of your normal scanning routine, since knowing what is happening all around you is what prepares you to deal with it.
8. When preparing to pass a vehicle on the left, it is important to ride on the left side of your lane because:
- The right side could be slippery.
- It will give you the best chance of spotting hazards in the next lane. ✓
- People don’t usually expect to be passed on their left.
- It will place you in the rearview mirror of the car in front of you.
Answer: B. It will give you the best chance of spotting hazards in the next lane.
9. When riding in a group while passing another vehicle, it is best to:
- Allow one rider to fully pass the other vehicle before another rider begins to pass. ✓
- Allow several members of the group to pass the other vehicle at once.
- Have the last rider in the group wave to the driver being passed to signal that no other motorcycles are approaching.
- Pass in a staggered formation.
Answer: A. Allow one rider to fully pass the other vehicle before another rider begins to pass.
Allow one rider to finish passing the other vehicle and get back into position before the next rider starts to pass. The manual says that on a two-lane highway, a staggered group should pass one rider at a time. The lead rider pulls out when safe, then returns to the left position and keeps passing speed to make room for the next rider. It also warns that the lead rider's pass does not prove conditions are still safe for everyone else. Waiting until there is enough room ahead lets each rider return to the same position held before the pass, which is simpler and safer.
10. To help provide space for drivers attempting to merge into your lane from an entrance ramp, you should:
- Stay in your lane.
- Merge into the next lane, if possible. ✓
- Not worry about it, since they are the ones trying to merge.
- Ride on the far left shoulder.
Answer: B. Merge into the next lane, if possible.
Merge into the next lane when there is room to do so. The manual says drivers entering from an entrance ramp may not see a motorcycle on the highway, so riders should give them plenty of room. It advises moving to another lane when one is open. If no lane change is available, the rider should adjust speed to create space for the merging vehicle. That makes moving over when possible the best match for the bank answer.
Advertisement
Source
Last checked: 2026-10-17 · Not yet verified
Updated: · Based on the official driver handbook