Traffic Signs & Signals — Michigan
Michigan CDL practice test: 371 free practice questions (Based on the official driver handbook). The official format is not yet verified; check the official site before your test. Traffic Signs & Signals: 4 questions.
Regulatory, warning and guide signs, plus traffic light and pavement marking questions.
This topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines.
| Topic / Metric | Value |
|---|---|
| Topic | Traffic Signs & Signals |
| License test | Michigan CDL permit (CLP) knowledge tests |
| Topic questions | 4 (1% of 371 total) |
| Review status | This topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines. |
Official handbook
Not yet verified
Advertisement
Questions (4)
1. When should a driver sign a vehicle inspection report?
- After every trip
- If noted defects are repaired ✓
- After each fueling
Answer: B. If noted defects are repaired
A driver should sign the vehicle inspection report if noted defects are repaired or certified as not needing repair. The handbook ties your signature to defect certification, not to completing a trip or stopping for fuel. It says a written inspection report may be required each day, and the motor carrier must fix any safety-related items listed and certify that repairs were done or were not needed. You sign the report only when defects were noted and that certification exists. The passenger-bus section repeats the same idea for reviewing the previous driver's report. That is why the signing point is after noted defects are repaired or cleared.
2. When approaching a drawbridge with a green light:
- You must stop.
- You may proceed without stopping. ✓
- You must wait for the light to change to yellow.
Answer: B. You may proceed without stopping.
3. Which of the following is not a warning sign of fatigue?
- Difficulty focusing
- Staying within your lane ✓
- Rubbing your eyes
Answer: B. Staying within your lane
4. When making a stop to pick up students, a driver should ensure all surrounding traffic has stopped before:
- Opening the door and signaling for the students to approach. ✓
- Turning on the alternating red lights.
- Pulling over to the side of the road.
Answer: A. Opening the door and signaling for the students to approach.
The driver should make sure all surrounding traffic has stopped before opening the door and signaling the students to approach. The handbook tells school bus drivers to make a final check that all traffic has stopped before completely opening the door and signaling students to approach. That places the traffic check right before the door opens and before students are given the signal to come toward the bus. It connects directly to the action of letting students approach, so the driver does not invite them forward until surrounding traffic is stopped.
Advertisement
Source
Last checked: 2026-10-17 · Verified from official source
Updated: · Based on the official driver handbook