Highway & Freeway Driving — Kansas
Kansas CDL practice test: 397 free practice questions (Based on the official driver handbook). The official format is not yet verified; check the official site before your test. Highway & Freeway Driving: 7 questions.
Entering and exiting freeways, lane changes, overtaking and HOV lane rules.
This topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines.
| Topic / Metric | Value |
|---|---|
| Topic | Highway & Freeway Driving |
| License test | Kansas CDL permit (CLP) knowledge tests |
| Topic questions | 7 (2% of 397 total) |
| Review status | This topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines. |
Official handbook
Not yet verified
Advertisement
Questions (7)
1. One way to overcome the challenges of blind spots is to:
- Drive faster than surrounding vehicles so no other drivers can pass you.
- Drive in the left lane, allowing you to only worry about vehicles to your right.
- Make frequent mirror checks and assess the positions of surrounding vehicles. ✓
- Avoid using your mirrors.
Answer: C. Make frequent mirror checks and assess the positions of surrounding vehicles.
Make frequent mirror checks and keep track of where surrounding vehicles are, so you know when one has slipped into a blind spot. The handbook says you cannot see everything with your mirrors, since blind spots exist that they do not show. That is exactly why it tells you to check your mirrors regularly: to know where other vehicles are around you and to notice when one moves into a blind spot. Checking often keeps you aware of traffic on both sides and behind, which matters if you suddenly need to change lanes.
2. Simply changing lanes can cause:
- A “crack-the-whip” effect, resulting in a rollover. ✓
- A trailer to straighten out.
- Confusion over which lane the driver is hoping to use.
- Other drivers to reduce their speed.
Answer: A. A “crack-the-whip” effect, resulting in a rollover.
Simply changing lanes can cause a “crack-the-whip” effect that turns the trailer over. The combination vehicles section tells you to avoid quick lane changes, especially when loaded. It explains that trucks with trailers have a dangerous crack-the-whip effect, and a quick lane change can turn the trailer over. The doubles and triples section adds that these vehicles must be driven smoothly and that you should change lanes gradually to avoid rollover or jackknife. So the hazard tied directly to changing lanes is the trailer being whipped over, not a benefit or a vague social effect.
3. When asked to make a lane change during the skills test, you should:
- Make the necessary traffic checks first. ✓
- Not use your mirrors.
- Cut off other vehicles if needed to follow the instructions.
- Not make the lane change if you don’t want to.
Answer: A. Make the necessary traffic checks first.
You should make the necessary traffic checks first, then signal and change lanes smoothly when it is safe. The handbook's lane change section says that during the multiple lane portions of the skills test you will be asked to move left and then back right. For each of those changes, you first make the necessary traffic checks, then use proper signals, then move over smoothly when it is safe. So checking traffic comes before anything else, and the examiner is watching to see that order. The pass is not about obeying the instruction instantly; it is about doing the checks and signaling before you move.
4. When entering traffic on an expressway during the skills test, you should:
- Check for traffic. ✓
- Not use signals.
- Abruptly enter a lane of traffic.
- Cut off other drivers if needed.
Answer: A. Check for traffic.
Check for traffic is the correct action when entering expressway traffic during the skills test. The handbook's on-road driving section expects regular traffic checks and a safe following distance. For lane changes, it says to make the needed traffic checks first, signal properly, and change lanes smoothly when safe. For expressway driving, it says to merge smoothly and to check traffic and mirrors thoroughly in all directions. When returning to the flow of traffic, it also says to check traffic from all directions, especially to the left, and to steer and accelerate smoothly when safe.
5. When changing lanes, you should:
- Move quickly before other vehicles get into the lane you wish to occupy.
- Move slowly, in case another vehicle is in the lane you wish to occupy. ✓
- Not use your turn signal.
- Never use the right lane.
Answer: B. Move slowly, in case another vehicle is in the lane you wish to occupy.
When changing lanes, you should move slowly and smoothly in case another vehicle is already in the lane you want to occupy. The handbook says to put your turn signal on before changing lanes and then change lanes slowly and smoothly. It gives the reason directly: a driver you did not see may get a chance to honk or avoid your vehicle. That matches the choice about moving slowly because another vehicle may be in the lane. The passage does not set an exact speed for lane changes; it tells you to make the move gradual and controlled.
6. If stopped on the road or shoulder, within 10 minutes, you must:
- Place emergency warning devices. ✓
- Alert local law enforcement.
- Stand behind your vehicle and motion for traffic to pass you.
- Call a mechanic.
Answer: A. Place emergency warning devices.
If you stop on the road or shoulder, you must place your emergency warning devices within 10 minutes. The handbook says that when you pull off the road and stop, you should turn on your four-way emergency flashers. It also says that if you must stop on a road or the shoulder, you must put out your emergency warning devices within ten minutes, and it then gives placement distances for those devices. That makes placing the warning devices the required action inside that ten-minute window, so the answer is the choice about setting out emergency warning devices.
7. When passing another vehicle, you should:
- Make eye contact with the other driver.
- Assume the other driver doesn’t see you. ✓
- Honk your horn.
- Wave to other drivers.
Answer: B. Assume the other driver doesn’t see you.
When passing another vehicle, you should assume the other driver does not see you. The handbook's communication section says other drivers may not notice your vehicle even when it is plainly visible. For passing, it gives a specific rule: whenever you are about to pass a vehicle, pedestrian, or bicyclist, assume they do not see you, because they could suddenly move in front of you. That is why you should expect the other driver to be unaware of you and drive carefully enough to avoid a crash, using a light horn tap or a night-time light flash only when it is legal.
Advertisement
Source
Last checked: 2026-10-17 · Verified from official source
Updated: · Based on the official driver handbook