Highway & Freeway Driving — Colorado
Colorado motorcycle permit practice test: 345 free practice questions (Based on the official driver handbook). The official format is not yet verified; check the official site before your test. Highway & Freeway Driving: 21 questions.
Entering and exiting freeways, lane changes, overtaking and HOV lane rules.
This topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines.
| Topic / Metric | Value |
|---|---|
| Topic | Highway & Freeway Driving |
| License test | Colorado Motorcycle permit test |
| Topic questions | 21 (6% of 345 total) |
| Review status | This topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines. |
Official handbook
Not yet verified
Advertisement
Questions (21)
1. When being passed, do not move into the portion of the lane farthest from the passing vehicle because:
- The passing vehicle may re-enter your lane too early. ✓
- You may prevent another vehicle from passing you.
- The portion of the lane nearest the passing vehicle is better.
- You are more likely to experience a wind blast from the passing vehicle on the far side of the lane.
Answer: A. The passing vehicle may re-enter your lane too early.
2. Motorists entering a highway from an entrance ramp to your right may not see your motorcycle. To help the entering drivers, you should:
- Sound your horn.
- Flash your lights.
- Move to the left portion of your lane so they can share the lane, if necessary.
- Move into another lane, if necessary. ✓
Answer: D. Move into another lane, if necessary.
Move into another lane if one is open, so the driver entering from the ramp has room. The manual addresses merging traffic directly: drivers coming down an entrance ramp often don't notice a motorcycle already on the highway, so you should give them plenty of room. Its first suggestion is to change to another lane when one is available. If a lane change isn't possible, the manual says to adjust your speed to create space for the merging vehicle. The point is to keep a cushion between you and a driver who hasn't seen you, rather than staying in a spot where you get squeezed.
3. When being followed too closely by another vehicle, you should:
- Speed up.
- Move onto the shoulder.
- Allow the other driver to pass you. ✓
- Exit the roadway.
Answer: C. Allow the other driver to pass you.
4. A group of riders should pass another vehicle:
- In a staggered formation.
- In a pyramid formation.
- One at a time. ✓
- In a splintered formation.
Answer: C. One at a time.
Riders should pass one at a time, with the lead rider pulling out first and then returning to the left position to make room for the next rider. The manual's passing-in-formation section says that on a two-lane highway, riders in a staggered formation should pass one at a time. It describes the lead rider pulling out and passing when safe, then returning to the left position and keeping passing speed to open room for the next rider. It does allow a group to pass as a unit on a freeway or interstate, so the one-at-a-time rule is the manual's guidance for the two-lane case. The bank answer fits that guidance.
5. To help provide space for drivers attempting to merge into your lane from an entrance ramp, you should:
- Stay in your lane.
- Merge into the next lane, if possible. ✓
- Not worry about it, since they are the ones trying to merge.
- Ride on the far left shoulder.
Answer: B. Merge into the next lane, if possible.
Merge into the next lane when there is room to do so. The manual says drivers entering from an entrance ramp may not see a motorcycle on the highway, so riders should give them plenty of room. It advises moving to another lane when one is open. If no lane change is available, the rider should adjust speed to create space for the merging vehicle. That makes moving over when possible the best match for the bank answer.
6. Before changing lanes, you should:
- Turn your head to check for vehicles in your blind spot. ✓
- Rely on your mirrors to show you all of your surroundings.
- Point in the direction of the lane change.
- Speed up to get ahead of other vehicles.
Answer: A. Turn your head to check for vehicles in your blind spot.
Before changing lanes, turn your head and look to the side to check your blind spot for other vehicles. The manual says mirrors alone are not enough, because motorcycles have blind spots just like cars. Before a lane change you should turn your head and look to the side for other vehicles. On a road with several lanes, it adds that you should check the lane next to you and the far lane too, since a driver further over may be aiming for the same space you want. Turning your head is how you find the traffic your mirrors miss.
7. To increase your line of sight when preparing to pass another vehicle on its left, you should:
- Ride in the left portion of your lane. ✓
- Ride in the right portion of your lane.
- Ride in the center portion of your lane.
- Try to stand up on your motorcycle.
Answer: A. Ride in the left portion of your lane.
To increase your line of sight before passing on the left, ride in the left portion of your lane. The manual's passing section tells you to set up in the left portion of the lane at a safe following distance. It says this widens what you can see and helps others see you. From there, you signal, watch for oncoming traffic, check mirrors, and turn your head to cover the blind spot before moving into the left lane when it is safe. That setup is specifically for preparing to pass on the left.
8. When preparing to pass another vehicle on the left, you should:
- Ride in the right portion of the lane.
- Ride in the left portion of the lane. ✓
- Get as close as possible to the vehicle in front of you.
- Not signal your intentions, as that may distract the driver you are passing.
Answer: B. Ride in the left portion of the lane.
When you get ready to pass on the left, stay in the left portion of your lane at a safe following distance before you make the move. The manual's passing steps start with lane position: ride in the left part of the lane while holding a safe gap behind the vehicle ahead. From there you can see farther down the road and other drivers are more likely to notice you. Only after you signal and check for oncoming traffic do you move into the left lane and speed up, picking a spot that gives you room rather than crowding the car. The manual also tells you not to hang around in the other driver's blind spot and to signal again before coming back.
9. When entering a highway or curve, motorcyclists riding in a group should:
- Ride single-file. ✓
- Ride in a staggered formation.
- Ride in pairs.
- Ride in the far right portion of the lane.
Answer: A. Ride single-file.
When entering a highway or a curve, motorcyclists riding in a group should ride single-file. The manual says to move to single-file formation when riding in curves, turning, and entering or leaving freeways or highways. For freeways and interstates it gives the same practical instruction: enter in single file, then form up only after every rider has safely merged. A staggered formation is described as the best way to keep ranks close with a space cushion, but the manual applies single-file to these transition points. That is why the group should not stay staggered while entering.
10. A group of riders should merge onto a highway in:
- A single-file formation. ✓
- A staggered formation.
- Pairs.
- A pyramid formation.
Answer: A. A single-file formation.
Merge onto a highway in a single-file formation, then form up once all riders are safely in traffic. The manual says to enter freeways and interstates in single file and to form up only after everyone has merged safely. It treats staggered formation as the normal way to ride on freeways, but not as the way to join them. It also lists entering or leaving freeways or highways among the situations where the group should move to single file. That points to single file for the merge itself, with staggered spacing used afterward.
Advertisement
Source
Last checked: 2026-10-17 · Verified from official source
Updated: · Based on the official driver handbook