Highway & Freeway Driving — Arizona
Arizona CDL practice test: 413 free practice questions (Based on the official driver handbook). The official format is not yet verified; check the official site before your test. Highway & Freeway Driving: 8 questions.
Entering and exiting freeways, lane changes, overtaking and HOV lane rules.
This topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines.
| Topic / Metric | Value |
|---|---|
| Topic | Highway & Freeway Driving |
| License test | Arizona CDL permit (CLP) knowledge tests |
| Topic questions | 8 (2% of 413 total) |
| Review status | This topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines. |
Official handbook
Not yet verified
Advertisement
Questions (8)
1. When passing another vehicle, you should:
- Make eye contact with the other driver.
- Assume the other driver doesn't see you. ✓
- Slow down.
Answer: B. Assume the other driver doesn't see you.
When passing another vehicle, assume the other driver does not see you. The handbook says that when you are about to pass a vehicle, pedestrian, or bicyclist, you should assume they do not see you, because they could suddenly move in front of you. It tells you to let them know you are there when it is legal, such as with a light horn tap or by flashing your lights at night, and to stay ready to avoid a crash whether or not they notice you. That supports assuming the other driver does not see you.
2. If planning to change lanes, your mirrors should:
- Not be checked.
- Be checked as usual.
- Be checked more often than usual. ✓
Answer: C. Be checked more often than usual.
When you plan to change lanes, check your mirrors more often than usual. The handbook treats lane changes as a special situation, and it says special situations call for more than your regular mirror checks. Before a lane change, you check to see whether someone is beside you or coming up to pass. After signaling, you check again for someone who may have slipped into your blind spot. You check right after starting the move and again after finishing it. That pattern of repeated looks is why the mirrors should get extra attention, not the same routine check.
3. During the driving test, when asked to make a lane change:
- You should not be concerned with other motorists.
- You should use your turn signal and change lanes when safe. ✓
- You should make the lane change as quickly as possible, even if that means cutting off another driver.
Answer: B. You should use your turn signal and change lanes when safe.
You should use your turn signal and make the lane change only when it is safe to do so. The handbook's lane-change section says that during the driving test you first make the necessary traffic checks, then use proper signals, and then change lanes smoothly when it is safe. Section 2 adds that you must check your mirrors before changing lanes, after signaling, and again as you start, to be sure no one is alongside you or in your blind spot. Signaling and waiting for a safe gap are what the test is looking for.
4. When you need to change lanes:
- Other vehicles will likely get out of your way.
- You should change lanes slowly and smoothly. ✓
- You should wait to change lanes until you are in an intersection.
Answer: B. You should change lanes slowly and smoothly.
5. When changing lanes:
- You should not use your mirrors.
- You should use your mirrors. ✓
- You should not use your turn signals.
Answer: B. You should use your mirrors.
When you change lanes, you should use your mirrors. The handbook treats lane changes as a special situation that calls for more than a quick glance. It says you need mirror checks to see whether someone is beside you or coming up to pass, and it lists checks before the move, after signaling, right after starting, and after finishing. It also describes using proper signals when changing lanes during the road test. Together, those points make mirror use part of a safe lane change, not something to skip.
6. Off-ramps:
- Are usually safest for trucks.
- Can be dangerous for trucks. ✓
- Should not be used by trucks.
Answer: B. Can be dangerous for trucks.
Off-ramps can be dangerous for trucks, so you need to slow down before you reach the curve. The handbook says freeway and turnpike exits can be particularly dangerous for commercial vehicles. Posted ramp speeds may be fine for cars but not for larger or heavily loaded vehicles, and an exit that drops downhill while it curves is especially risky because the downgrade makes it hard to slow down. Braking and turning at the same time is dangerous, so you should be going slowly enough before you get to the curved part of the ramp.
7. To change lanes, you should:
- Move quickly.
- Move slowly and smoothly. ✓
- Hold down your horn.
Answer: B. Move slowly and smoothly.
8. When changing lanes, turn signals:
- Should not be used.
- Should only be used if a vehicle is close to you.
- Should be used each time. ✓
Answer: C. Should be used each time.
Turn signals should be used each time you change lanes. The handbook's lane-change instructions start with putting your turn signal on before you change lanes, and it tells you to check your mirrors again after you have signaled to confirm nobody slipped into your blind spot. The on-road section repeats that you activate turn signals when required and cancel them once the lane change is finished. Nothing in these passages makes signaling depend on whether another vehicle happens to be near you, so the signal is simply part of every lane change.
Advertisement
Source
Last checked: 2026-10-17 · Verified from official source
Updated: · Based on the official driver handbook