Highway & Freeway Driving — Alabama
Alabama CDL practice test: 447 free practice questions (Based on the official driver handbook). The official format is not yet verified; check the official site before your test. Highway & Freeway Driving: 4 questions.
Entering and exiting freeways, lane changes, overtaking and HOV lane rules.
This topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines.
| Topic / Metric | Value |
|---|---|
| Topic | Highway & Freeway Driving |
| License test | Alabama CDL permit (CLP) knowledge tests |
| Topic questions | 4 (1% of 447 total) |
| Review status | This topic page is still being reviewed against the official handbook. Until review is finished it is hidden from search engines. |
Official handbook
Not yet verified
Advertisement
Questions (4)
1. To change lanes, you should:
- Move quickly.
- Move slowly and smoothly. ✓
- Hold down your horn.
Answer: B. Move slowly and smoothly.
2. When entering traffic on an expressway during the skills test, you should:
- Check for traffic. ✓
- Not use signals.
- Abruptly enter a lane of traffic.
- Cut off other drivers if needed.
Answer: A. Check for traffic.
Check for traffic is the correct action when entering expressway traffic during the skills test. The handbook's on-road driving section expects regular traffic checks and a safe following distance. For lane changes, it says to make the needed traffic checks first, signal properly, and change lanes smoothly when safe. For expressway driving, it says to merge smoothly and to check traffic and mirrors thoroughly in all directions. When returning to the flow of traffic, it also says to check traffic from all directions, especially to the left, and to steer and accelerate smoothly when safe.
3. When changing lanes:
- You should move your vehicle quickly.
- You should move your vehicle slowly. ✓
- The move should be made with a jerking motion.
- You do not need to use a turn signal.
Answer: B. You should move your vehicle slowly.
You should move your vehicle slowly when changing lanes. The handbook says to put your turn signal on before changing lanes, then change lanes slowly and smoothly. That slow, smooth move gives a driver you did not see a chance to honk or avoid you. Moving slowly is the answer that matches the handbook; the passage does not support quick movements or jerking the vehicle.
4. When changing lanes, turn signals:
- Should not be used.
- Should only be used if a vehicle is close to you.
- Should be used each time. ✓
Answer: C. Should be used each time.
Turn signals should be used each time you change lanes. The handbook's lane-change instructions start with putting your turn signal on before you change lanes, and it tells you to check your mirrors again after you have signaled to confirm nobody slipped into your blind spot. The on-road section repeats that you activate turn signals when required and cancel them once the lane change is finished. Nothing in these passages makes signaling depend on whether another vehicle happens to be near you, so the signal is simply part of every lane change.
Advertisement
Source
Last checked: 2026-10-17 · Not yet verified
Updated: · Based on the official driver handbook