(108/180) When approaching a railway crossing where an electrical or mechanical signal device is warning of the approach of a train, you must…?

Accuracy: 74.8% AI Difficulty: 2

Stop at least 5m from the nearest rail or gate Increase speed and cross the tracks as quickly as possible Slow down and proceed with caution Stop not less than 1.5m from the nearest rail

Previous Next

Explanation

AI Difficulty Assessment

Question Analysis

This question evaluates the knowledge of basic safety procedures at railway crossings as per Ontario traffic regulations. It specifically tests the understanding of what actions are required when warning signals indicate a train's approach. According to Ontario's Highway Traffic Act, drivers must stop at least 5 meters from the nearest rail or gate when a train is approaching, highlighting fundamental safety measures at railway crossings.

Correct Answer Analysis

Correct Answer: Stop at least 5m from the nearest rail or gate

The correct option is to stop at least 5m from the nearest rail or gate. This is in accordance with Ontario's traffic rules which dictate that when an automatic signal or gate indicates the approach of a train, the driver must halt to prevent accidents and ensure safety. Stopping at this distance ensures that the vehicle is clear of the crossing and any potential danger from passing trains. In a practical driving scenario, this action is critical to avoid collision risks with the train, making it a key safety procedure taught in the G1 Driver License Test.

Wrong Options Analysis

Option: Increase speed and cross the tracks as quickly as possible.

This option is incorrect as it is dangerous and violates traffic laws. Trying to beat the train by increasing speed is a common mistake that can lead to deadly accidents. In Ontario, it is illegal to cross when warning signals are active. Drivers should never attempt to outpace a train for safety reasons.

Option: Slow down and proceed with caution.

This is incorrect under the given conditions because caution, without stopping, is insufficient when signals are warning of a train. Ontario law requires a complete stop at a safe distance to account for any uncertainties regarding a train's speed and distance.

Option: Stop not less than 1.5m from the nearest rail.

The incorrect distance in this option does not conform to Ontario's standards. Stopping not less than 5m is required to ensure ample space between the vehicle and the tracks for safety. A 1.5m distance is potentially hazardous as it leaves less room for error or unexpected situations.

About this Ontario G1 License question

This question is part of the Canada Ontario (ON) G1 License knowledge test question bank. Read the explanation above, then browse more questions on the same topic below.

Practise by topic

Traffic Signs & Signals Right of Way & Intersections Speed Limits & Following Distance Impaired Driving & Penalties Parking & Stopping Rules Highway & Freeway Driving Bad Weather & Night Driving Sharing the Road

(108/180) When approaching a railway crossing where an electrical or mechanical signal device is warning of the approach of a train, you must…?

Explanation

About this Ontario G1 License question

Practise by topic

Related Questions