Before you drive your vehicle, you should

  1. sound your horn as a warning.
  2. walk all around the vehicle to check for obstacles or pedestrians. ✓
  3. rev up your engine.
  4. lower your windows.

Answer: B. walk all around the vehicle to check for obstacles or pedestrians.

Before you drive, you should walk all around the vehicle to check for obstacles or pedestrians.

Why this is the answer

The handbook says the pre-trip inspection is meant to confirm your vehicle is safe before you start your trip, and it describes taking a careful walk around the vehicle. A backing-up procedure also says to step out and check the area for hazards and obstacles above, below, and on all sides. That supports walking around before you move. The passages do not mention sounding the horn, revving the engine, or lowering windows as a pre-drive check.

Why the other answers are wrong

Remember it

Before you move, make a full circle: look for hazards above, below, behind, and beside the vehicle.

Official handbook: ICBC Driving Commercial Vehicles, 10 Vehicle and air brake pre-trip inspections – Conducting a pre-trip inspection, p. 233

Explanation drafted with AI (deepseek-flash) from the official handbook passage cited above, then checked automatically and by a second model on 2026-10-23. Always confirm with the official handbook.